NSLU2-Linux
view · edit · print · history
 RedBoot> exec 0x01d00000
 Using base address 0x01d00000 and length 0x000de904
 Uncompressing Linux................................................................. done, booting the kernel.
 Linux version 2.6.7 (dereky@localhost) (gcc version 3.3.3) #10 Thu Sep 16 02:09:23 HST 2004
 CPU: XScale?-IXP42x? Family [690541f1] revision 1 (ARMv5TE?)
 CPU: D undefined 5 cache
 CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
 CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
 Machine: Intel IXDP425 Development Platform
 Warning: bad configuration page, trying to continue
 Memory policy: ECC disabled, Data cache writeback
 On node 0 totalpages: 8192
 DMA zone: 8192 pages, LIFO batch:2
 Normal zone: 0 pages, LIFO batch:1
 HighMem? zone: 0 pages, LIFO batch:1
 Built 1 zonelists
 Kernel command line: console=ttyS0,115200 root=/dev/ram0 initrd=0x01000000,10M mem=32M@0x00000000
 PID hash table entries: 256 (order 8: 2048 bytes)
 Memory: 32MB = 32MB total
 Memory: 20136KB available (1561K code, 402K data, 76K init)
 Calibrating delay loop... 133.12 BogoMIPS?
 Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
 Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
 Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
 CPU: Testing write buffer coherency: ok
 checking if image is initramfs...it isn't (no cpio magic); looks
 like an initrd
 Freeing initrd memory: 10240K
 NET: Registered protocol family 16
 PCI: IXP4xx? is host
 PCI: IXP4xx? Using direct access for memory space
 PCI: bus0: Fast back to back transfers disabled
 dmabounce: registered device 0000:00:01.0 on pci bus
 dmabounce: registered device 0000:00:01.1 on pci bus
 dmabounce: registered device 0000:00:01.2 on pci bus
 NetWinder? Floating Point Emulator V0.97 (double precision)
 JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
 IXP4xx? Watchdog Timer: heartbeat 60 sec
 Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
 ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale?
 ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale?
 RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
 loop: loaded (max 8 devices)
 Using anticipatory io scheduler
 cfi_cmdset_0001: Erase suspend on write enabled
 Using buffer write method
 No RedBoot partition table detected in IXP4XX-Flash0
 IXP4XX-Flash: probe of IXP4XX-Flash0 failed with error -22
 i2c /dev entries driver
 md: raid0 personality registered as nr 2
 md: raid1 personality registered as nr 3
 md: raid5 personality registered as nr 4
 raid5: measuring checksumming speed
 arm4regs : 76.400 MB/sec
 8regs : 92.000 MB/sec
 32regs : 98.400 MB/sec
 raid5: using function: 32regs (98.400 MB/sec)
 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
 NET: Registered protocol family 2
 IP: routing cache hash table of 512 buckets, 4Kbytes
 TCP: Hash tables configured (established 2048 bind 4096)
 NET: Registered protocol family 1
 md: Autodetecting RAID arrays.
 md: autorun ...
 md: ... autorun DONE.
 RAMDISK: Compressed image found at block 0
 RAMDISK: incomplete write (-28 != 1024) 10485760
 VFS: Mounted root (ext2 filesystem) readonly.
 Freeing init memory: 76K
 Using /lib/modules/ixp400.ko
 ixp400: module license 'unspecified' taints kernel.
 Module init.
 Using /lib/modules/ixp425_eth.ko
 ixp425_eth:
 Initializing IXP425 NPE Ethernet driver software v. 1.1A
 ixp425_eth: CPU clock speed (approx) = 0 MHz?
 [error] ixEthMiiPhyScan : unexpected Mii PHY ID 00008201
 ixp425_eth: npe0 is using the PHY at address 0
 ixp425_eth: npe1 is using the PHY at address 1
 Using /lib/modules/2.6.7/kernel/drivers/usb/core/usbcore.ko
 usbcore: registered new driver usbfs
 usbcore: registered new driver hub
 Using /lib/modules/2.6.7/kernel/drivers/usb/host/ehci-hcd.ko
 PCI: enabling device 0000:00:01.2 (0140 -> 0142)
 ehci_hcd 0000:00:01.2: EHCI Host Controller
 ehci_hcd 0000:00:01.2: irq 26, pci mem c2856000
 ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
 ehci_hcd 0000:00:01.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 5 ports detected
 Using /lib/modules/2.6.7/kernel/drivers/usb/host/ohci-hcd.ko
 PCI: enabling device 0000:00:01.0 (0140 -> 0142)
 ohci_hcd 0000:00:01.0: OHCI Host Controller
 ohci_hcd 0000:00:01.0: irq 28, pci mem c2858000
 ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 3 ports detected
 PCI: enabling device 0000:00:01.1 (0140 -> 0142)
 ohci_hcd 0000:00:01.1: OHCI Host Controller
 ohci_hcd 0000:00:01.1: irq 27, pci mem c285a000
 ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3
 hub 3-0:1.0: USB hub found
 hub 3-0:1.0: 2 ports detected
 Using /lib/modules/2.6.7/kernel/drivers/scsi/scsi_mod.ko
 SCSI subsystem initialized
 Using /lib/modules/2.6.7/kernel/drivers/scsi/sd_mod.ko
 usb 1-1: new high speed USB device using address 2
 Using /lib/modules/2.6.7/kernel/drivers/usb/storage/usb-storage.ko
 Initializing USB Mass Storage driver...
 scsi0 : SCSI emulation for USB Mass Storage devices
 Vendor: Maxtor 4 Model: R060L0? Rev: RAMC
 Type: Direct-Access ANSI SCSI revision: 02
 SCSI device sda: 120103201 512-byte hdwr sectors (61493 MB)
 sda: assuming drive cache: write through
 sda: sda1 sda2 sda3
 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
 usbcore: registered new driver usb-storage
 USB Mass Storage support registered.
 Initializing random number generator... done.
 Starting network...
 (none) login: root
 Jan 1 15:23:42 login[127]: root login on `ttyS0'



 BusyBox v1.00-rc3 (2004.09.16-11:45+0000) Built-in shell (ash)
 Enter 'help' for a list of built-in commands.

 # ifconfig -a
 eth0 Link encap:Ethernet HWaddr? 00:02:B3:01:01:01
 inet addr:192.168.1.77 Bcast:192.168.1.255
 Mask:255.255.255.0
 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:256
 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)  

 eth1 Link encap:Ethernet HWaddr? 00:02:B3:02:02:02
 BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:256
 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

 lo Link encap:Local Loopback
 inet addr:127.0.0.1 Mask:255.0.0.0
 UP LOOPBACK RUNNING MTU:16436 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:0
 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

 #
view · edit · print · history · Last edited by dyoung.
Originally by dyoung.
Page last modified on April 14, 2005, at 03:26 PM