view · edit · print · history

RedBoot "help" output:
(This should apply to the DS101J too, except for the "msys_run" command)

RedBoot> help
read data from MDOC
Manage aliases kept in FLASH memory
   alias name [value]
Set/Query the system console baud rate
   baudrate [-b <rate>]
Manage machine caches
   cache [ON | OFF]
Display/switch console channel
   channel [-1|<channel number>]
Compute a 32bit checksum [POSIX algorithm] for a range of memory
   cksum -b <location> -l <length>
Display (hex dump) a range of memory
   dump -b <location> [-l <length>] [-s] [-1|2|4]
Execute an image - with MMU off
   exec [-w timeout] [-b <load addr> [-l <length>]]
        [-r <ramdisk addr> [-s <ramdisk length>]]
        [-c "kernel command line"] [<entry_point>]
Manage FLASH images
   fis {cmds}
Manage configuration kept in FLASH memory
   fconfig [-i] [-l] [-n] [-f] [-d] | [-d] nickname [value]
Execute code at a location
   go [-w <timeout>] [entry]
Help about help?
   help [<topic>]
Display command history
Set/change IP addresses
   ip_address [-l <local_ip_address>[/<mask_len>]] [-h <server_address>]
Load a file
   load [-r] [-v] [-d] [-h <host>] [-m <varies>] [-c <channel_number>]
        [-b <base_address>] <file_name>
Compare two blocks of memory
   mcmp -s <location> -d <location> -l <length> [-1|-2|-4]
Copy memory from one address to another
   mcopy -s <location> -d <location> -l <length> [-1|-2|-4]
Fill a block of memory with a pattern
   mfill -b <location> -l <length> -p <pattern> [-1|-2|-4]
Network connectivity test
   ping [-v] [-n <count>] [-l <length>] [-t <timeout>] [-r <rate>]
        [-i <IP_addr>] -h <IP_addr>
Reset the system
Set/Read MAC address for NPE ethernet ports
   set_npe_mac [-p <portnum>] [xx:xx:xx:xx:xx:xx]
Factory test
   synotest [-led][-button][-ram][-lan][-pci][-ide][-usb]
Display RedBoot version information
Display (hex dump) a range of memory
   x -b <location> [-l <length>] [-s] [-1|2|4]

Output of RedBoot "fis help":

RedBoot> fis help
*** invalid 'fis' command: unrecognized command
  fis create -b <mem_base> -l <image_length> [-s <data_length>]
      [-f <flash_addr>] [-e <entry_point>] [-r <ram_addr>] [-n] <name>
  fis delete name
  fis erase -f <flash_addr> -l <length>
  fis free
  fis init [-f]
  fis list [-c] [-d]
  fis load [-d] [-b <memory_load_address>] [-c] name
  fis lock [-f <flash_addr> -l <length>] [name]
  fis unlock [-f <flash_addr> -l <length>] [name]
  fis write -f <flash_addr> -b <mem_base> -l <image_length>

view · edit · print · history · Last edited by repvik.
Originally by repvik.
Page last modified on February 17, 2006, at 11:02 PM